Description
Very high performance, linear sensors. Fully sealed and ideal for use on gearbox, throttle, suspension and steering sensing applications.
Technical Data Life expectancy >25 million cycles
Operational speed 10 m/s Max
Environmental sealing OEring and felt shaft seal
Temperature range -40 to +100C
Cable type Raychem 55, 24 AWG
Cable length 600mm (screened)
Repeatability 0.01mm
Maximum supply voltage 42VDC
Mechanical stroke +1.5mm of electrical stroke
Installation
There are 3 leads that come from the sensor: the red lead should be attached to the +5v supply from the DL1, the black lead should be connected to the ground connection on the DL1 and the white lead should be connected to an analogue input. A user defined variable can be entered into the analysis software to convert the voltage into an actual displacement if required.
|